
Minimums and ordering
Jewelry MOQ: Mixing Styles, Plating Colors and Ring Sizes
The minimum counts per style and per plating color; this is how to lay out a first order so every line reaches it.
Lucky Factory is a custom jewelry manufacturer in Dongguan, China. We make stainless steel, brass and 925 silver jewelry for online brands as OEM or private label, from 100 pieces per style. Our tested samples have third-party lab reports from CTT, and we send the full reports on request.
Brands we have made for







01 / What we make
We make earrings, necklaces, bracelets, rings and pendants in stainless steel, brass and 925 silver, and you choose everything from the metal to the box.

02 / Ways to start, minimums and costs
Add your logo to one of our designs, change one of them, or send your own.
| Way to start | Minimum order | Timing |
|---|---|---|
| Private label | 100 pcs | Bulk 20–40 days |
| Our designs (ODM) | 100 pcs (subject to quote) | Sample 7–10 working days |
| Your design (OEM) | 100 pcs | CAD to bulk: see the steps below |
Compare the three ways in full →
Whichever way you start, a new design follows the same steps.
Subject to quote
03 / Workshop and reports
See how we make and inspect each batch, and the lab reports and audit we hold.




Every batch goes through incoming (IQC) and outgoing (FQC) inspection to GB/T 2828.1, at AQL 2.5 for major and AQL 4.0 for minor defects.






04 / Our commitments
What buyers worry about, and what we do about each.
Fewer good pieces than you ordered.
2% spare pieces are included with each bulk order at no extra cost.
Faulty pieces in an order.
We mark and isolate defective pieces, rework and re-inspect the ones that can be repaired, and scrap the rest. If a sampling check fails, we inspect the whole batch before it ships. If you find a fault or damage after delivery, contact us with photos or video.
Too many defective pieces in a bulk order.
Our overall defect rate is under 1%.
Plating or metal with no test results behind it.
We run salt-spray, artificial-sweat and wear tests on plated finishes, and our tested samples have third-party lab reports for nickel release, lead and cadmium.
05 / Before you buy
Plain answers to what buyers ask first, from finishes and minimums to samples and testing.

Minimums and ordering
The minimum counts per style and per plating color; this is how to lay out a first order so every line reaches it.

Quality and inspection
What each kind of check can and cannot show: AQL inspection, sample approval, lab reports and a factory audit.

Samples and lead time
What a sample costs, how long each step takes, and why a cast design is quoted differently from a wire-cut one.
06 / Questions
Short answers on privacy, payment, minimums, mixing styles and timing.
Yes. We can sign an NDA before you share your designs.
You pay a 30–50% deposit by T/T when the order is confirmed, and the balance before shipment (subject to quote).
Private label and your own designs start from 100 pieces per style.
Yes, you can mix styles in one order; the minimum applies to each style in each plating color, not to the whole order.
Samples of new designs take 15–35 days and bulk 20–40 days. A sample with your logo takes 7–10 working days.
07 / Other ways to start
Want to hold a piece first? Ask us for a sample.
A sample of one of our designs with your logo takes 7–10 working days. Your quote lists the sample fee.
08 / Your brief
Prefer to talk first? Message us on WhatsApp →
Thanks, your brief is in. We will reply by email to .
First reply within 12 hours.
Send your brief by email or WhatsApp and we will reply.
First reply within 12 hours.
See how we use your details in our Privacy notice.